Choosing a decking material is a choice about the next decade or two of weekends. Some materials ask for annual attention and reward it with natural beauty; others ask for little more than a rinse. The right answer depends on climate, sun exposure, how you feel about maintenance and how the deck will look next to your house.
Pressure-Treated Lumber
Treated softwood, usually pine, is infused with preservatives that resist rot and insects. It is the most widely used decking material because it is affordable, available everywhere and easy to work with. Its drawbacks are familiar: boards can warp, check and splinter as they dry, and the wood needs regular cleaning and a water-repellent stain or sealer to stay in good condition. Properly maintained, it lasts a long time; neglected, it grays and roughens quickly. Fasteners must be rated for treated lumber, since the preservatives are corrosive to ordinary steel.
Cedar and Redwood
These softwoods contain natural oils that resist decay, and they are prized for their color and straight grain. They are lighter than treated lumber, stay cooler in the sun and smell wonderful when cut. They are also softer, so they dent and scratch more easily, and they weather to silver-gray unless stained periodically. Availability and quality vary by region. Where they are available, they make a beautiful deck for homeowners who enjoy the ritual of annual care.
Tropical Hardwoods
Dense hardwoods such as ipe are extremely hard, heavy and naturally resistant to rot and insects. They can last for decades and have a rich, furniture-like appearance. They are also expensive, difficult to cut and drill, and require pre-drilled holes and stainless fasteners. Left unfinished, they weather to gray; oiled regularly, they keep their color. Ask about responsible sourcing, since harvesting practices vary.
Composite and PVC Decking
Composite boards blend wood fibers with plastic. Most modern composites are capped, meaning a protective polymer shell wraps the core and resists stains, fading and mold far better than early uncapped versions. They never need staining, do not splinter and come in a range of colors and embossed grain patterns. Composites are heavier than wood, can get hot in direct sun, especially in darker colors, and have a slightly different feel underfoot. They also require their own fastening systems, often hidden clips that leave a clean surface. Because the boards are manufactured, their color is consistent, which some homeowners love and others find too uniform.
Cellular PVC decking contains no wood at all, so it is the most resistant to moisture, mold and insects, which makes it a good fit for docks, pool surrounds and very wet climates. It is lightweight and comes in realistic wood looks. Like composite, it can warm up in the sun and expands and contracts with temperature, so installation details matter. Aluminum decking exists as well, mainly for commercial and specialty uses.
Making the Call
- Love real wood and willing to maintain it? Cedar, redwood or treated lumber.
- Want the look of wood with minimal upkeep? Capped composite.
- Deck near water or in constant shade? PVC.
- Want heirloom durability and have the budget? Tropical hardwood.
Order samples and leave them in the sun for a week. Touch them barefoot at midday, splash them with water, and look at them against your siding. Decking is a material you will see from every back window, so it deserves that kind of trial.
Beyond the Boards: What Else Shapes Deck Performance
The decking material gets most of the attention, but the parts beneath and around it affect how long the deck lasts and how it feels to use.
Framing
Most decks, even those with composite or PVC surfaces, are framed with pressure-treated lumber rated for ground contact or exterior use. Some manufacturers specify joist spacing for their boards, and composite or PVC boards laid diagonally often require closer spacing. Following the decking manufacturer’s framing requirements is essential for warranties and performance.
Joist Protection
Joist tape or flashing applied to the tops of joists can help reduce moisture absorption where boards and fasteners meet the framing. This is especially useful beneath low-maintenance decking, since the surface boards may outlast unprotected framing.
Fasteners
Screws and hidden clips must be compatible with both the decking and the framing. Stainless steel or coated fasteners rated for treated lumber help prevent corrosion, particularly in damp or coastal environments.
Ventilation and Clearance
Decks built close to the ground need adequate airflow beneath them so moisture can escape. Poor ventilation can shorten the life of framing and cause some decking materials to behave unpredictably.
Railings and Trim
Railings, fascia boards and stair treads should be chosen alongside the decking. Many composite and PVC manufacturers offer coordinating railings and trim, while wood decks can use matching wood, metal or cable railings.
Maintenance at a Glance
- Pressure-treated: Clean regularly, allow new lumber to dry before the first stain or sealer as recommended, and reapply finishes as they wear.
- Cedar and redwood: Clean gently to avoid damaging soft wood and apply stain or sealer periodically to maintain color.
- Tropical hardwood: Oil periodically if you want to maintain the original color, or allow it to weather naturally.
- Composite: Wash with soap and water or a cleaner approved by the manufacturer, and clear debris from gaps between boards.
- PVC: Rinse and wash as needed, and follow manufacturer guidance on cleaning products.
Common Decking Mistakes
- Mixing fasteners and materials incorrectly, which can lead to corrosion or voided warranties.
- Ignoring board gapping requirements. Wood shrinks and swells with moisture; composite and PVC expand and contract with temperature.
- Choosing dark composite in full sun without testing how hot it gets.
- Staining new pressure-treated lumber too soon, before it has dried enough to absorb the finish.
- Replacing boards without checking framing, which may be near the end of its life.
Decking Questions We Hear
Can I put new decking on old framing?
Sometimes, if the framing is sound, properly spaced and in good condition. Because new decking can last many years, it is worth having the framing evaluated before resurfacing.
Is composite slippery when wet?
Many composite and PVC boards are textured to improve traction. Slip resistance varies by product, so check specifications and feel samples when wet.
Which material is best for a dog-friendly deck?
Capped composite and PVC resist scratches and stains better than softer woods, though no surface is entirely scratch-proof. Lighter colors stay cooler for paws in the sun.





