A.X. Home Pro is loading
Wooden door with a glass panel

Storm Door Installation

Posted by:

|

On:

|

A storm door is one of those upgrades that quietly earns its keep every day. It sits in front of your main entry door, and in doing so it does two important jobs: storm doors add an air barrier and protect the entry door. That means a more comfortable entry in cold weather, less wear on an expensive front or back door, and, with the right style, a way to let in light and fresh air without opening your home to bugs. Here is what to know before you choose and install one.

How a Storm Door Helps

An added air barrier

Even a well-sealed entry door can let drafts through around the edges, especially as weatherstripping ages. A storm door creates a pocket of still air between itself and the entry door. That layer slows heat loss in winter and reduces the drafts you feel near the door. It is not a substitute for good weatherstripping on the main door, but the two together make a noticeable difference at a busy entry.

Protection for the entry door

Your main door takes a beating from rain, sun, wind and temperature swings. Over time that exposure fades paint and stain, swells wood, wears finishes and ages weatherstripping. A storm door shields the entry door from much of that weather, which can extend the life of its finish and hardware.

Advertisement

Light and ventilation

Many storm doors have interchangeable glass and screen panels or retractable screens. On a nice day you can open the main door and let in a breeze while the screen keeps insects out.

Choosing the Right Storm Door

Styles

  • Full-view: A single large glass panel that shows off a decorative entry door. Usually paired with a swap-in screen panel.
  • Mid-view or high-view: Glass on the upper portion with a solid lower panel that resists kicks, pets and strollers.
  • Retractable screen: A screen that rolls up into the door frame and slides down when you want ventilation, so you do not have to store and swap panels.
  • Security-style: Heavier frames and locking hardware for added protection.

Materials

Aluminum storm doors are lightweight and common. Steel and heavier-gauge frames are sturdier. Wood-core and composite options offer a different look and feel. Choose based on how much traffic the door gets, how exposed it is to weather and the look of your home.

Hardware and features

  • A closer, or two for heavier doors, that controls the swing and keeps the door from slamming.
  • A wind chain or wind-resistant closer to keep gusts from wrenching the door open.
  • A keyed lock or deadbolt if security matters.
  • A bottom sweep or expander that seals against the threshold.

A Word About Sun and Heat

On a door that faces strong afternoon sun, the space between a glass storm door and the entry door can get very hot. That heat can damage some finishes and materials on the entry door. Many entry door manufacturers have guidance on this. Options include choosing a storm door with low-E glass, venting the storm door, or swapping in the screen panel during hot months. It is worth checking before you buy.

What Installation Involves

Storm door installation looks straightforward but rewards precision. A typical installation includes:

  1. Measuring the opening carefully, height and width at several points, to choose the right size and confirm the frame is square.
  2. Choosing hinge side based on how the entry door swings, where the handle is and any nearby obstacles like railings or light fixtures.
  3. Fitting the drip cap and hinge rail, trimming to length as needed.
  4. Mounting the door to the exterior brick molding or trim, shimming as needed so it hangs plumb.
  5. Installing the latch rail, sweep and expander so the door seals evenly.
  6. Adding closers and hardware, then adjusting the closer speed so the door shuts gently and latches.

If the existing trim around the entry is rotted, out of square or damaged, it should be repaired first. A storm door mounted to failing trim will not seal or swing correctly.

Advertisement

Caring for Your Storm Door

  • Clean glass and frames with mild soap and water.
  • Check closers and adjust them seasonally, since temperature affects closing speed.
  • Lubricate hinges and latch mechanisms as the manufacturer recommends.
  • Inspect the sweep and weatherstripping each fall.
  • Swap glass and screen panels with the seasons if your door uses them.

Common Mistakes to Avoid

  • Measuring once and ordering the wrong size.
  • Hanging the door on the wrong side, so it blocks the handle or a walkway.
  • Skipping the wind chain on a windy exposure.
  • Ignoring sun exposure and heat buildup against the entry door.
  • Mounting to rotted or uneven trim.

Is a Storm Door Right for You?

A storm door is a strong choice if your entry gets a lot of weather, if you have a beautiful entry door you want to protect, if you feel drafts near the door in cold months, or if you would like screened ventilation. It may be less useful on a deeply covered porch where the entry door is already well protected.

Your Next Step

  1. Note which doors feel drafty or show weather wear.
  2. Check sun exposure on those doors.
  3. Decide on style: full-view, mid-view, retractable screen or security.
  4. Inspect the trim around the opening for rot.
  5. Have the opening measured and the door installed so it seals and swings correctly.

We can help you pick a storm door that fits your entry and install it properly. AX Home Pro handles repairs, improvements and maintenance for homeowners. Request an estimate to get started.

Latest stories

View all

Posted by

in

--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →Kingswell Strategic Ventures

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse