A.X. Home Pro is loading
Grey metal pipe on a concrete wall

Water Heater Maintenance Before Winter: Flushing, Inspection and Warning Signs

As temperatures drop in North Georgia, the water coming into your home gets colder, and your water heater has to work harder to deliver the same hot shower. Add holiday cooking, extra laundry and more dishes, and winter is when a tired water heater is most likely to let you know it’s struggling. A little attention in early November can help it run more efficiently and give you a heads-up before a small issue becomes a cold shower or a flooded utility room.

Know What Kind of Water Heater You Have

Start by finding the label on your water heater. It will tell you whether it’s gas or electric, its capacity and usually the manufacture date, sometimes encoded in the serial number. Tank-style water heaters are the most common, but some homes have tankless units, which have their own maintenance needs, such as periodic descaling. Keep the owner’s manual handy or look it up by model number, because manufacturer instructions should always come first. If your unit is gas-fired, any work involving the gas valve, burner, venting or pilot should be handled by a licensed plumber or gas technician.

Why Flushing the Tank Helps

Over time, minerals and sediment settle at the bottom of a tank water heater. That layer can make the unit less efficient, cause popping or rumbling sounds as water heats underneath it, and in some cases shorten the life of the tank or heating elements. Flushing some water out of the tank periodically helps remove that sediment. Many manufacturers recommend flushing on a regular schedule, so check your manual for the recommended interval.

Advertisement

A General Overview of Flushing

Every unit is different, so follow your manufacturer’s instructions, but the basic process usually looks like this:

  • Turn off power to an electric unit at the breaker, or set a gas unit to its vacation or pilot setting as directed in the manual
  • Let the water cool, since tank water is hot enough to scald
  • Attach a garden hose to the drain valve and run it to a floor drain or outside
  • Shut off the cold water supply, open a hot water faucet nearby, then open the drain valve
  • Drain until the water runs clearer, close the valve, refill the tank fully and then restore power or gas

An important caution for electric units: never turn the power back on until the tank is completely full, or you can damage the heating elements. Older plastic drain valves can also be brittle. If a valve won’t close completely or starts leaking, or if you’re simply not comfortable with the process, call a plumber.

Other Quick Checks

While you’re there, look around the base of the tank for moisture, rust or corrosion, and check the water and gas connections at the top for drips or green and white crusting. Make sure the area around a gas water heater is clear of boxes, paint cans, laundry and anything flammable, and that nothing is blocking the air it needs. The temperature and pressure relief valve is a critical safety device. If it’s dripping, or if you’re unsure whether it works, have a licensed plumber inspect it rather than tampering with it. Many tank water heaters also have an anode rod that protects the tank from corrosion and wears out over time; your plumber can check its condition during service.

Set the Temperature Thoughtfully

A higher setting doesn’t necessarily mean better performance. Water that’s too hot increases the risk of scalding, especially for young children and older adults, and uses more energy. Many manufacturers ship units at a moderate setting and provide guidance on adjusting it. If you have family members who are more vulnerable to burns, consider anti-scald fixtures, especially in bathrooms.

Signs It May Be Time for Replacement

Every water heater eventually wears out. Warning signs include rusty or discolored hot water, water pooling around the base, frequent loss of hot water, increasingly loud rumbling and an older unit that’s needing repairs more often. A leaking tank itself usually can’t be repaired. If your water heater is approaching the end of its expected lifespan, planning a replacement now is far less stressful than dealing with an emergency on a holiday weekend. It’s also a good opportunity to consider whether a different size or type better fits your household. Installation of a new water heater, particularly gas units, involves venting, gas and code requirements, so it’s a job for licensed professionals.

Advertisement

A few minutes of maintenance and a careful look now can help your water heater keep up with everything winter brings.

A Yearly Water Heater Checklist

Putting a few water heater checks on the same calendar as other seasonal tasks makes them easy to remember. Here is a simple routine for most tank-style units. Always defer to the manufacturer’s instructions for your model.

  • Once or twice a year: look around the base and connections for moisture, rust and corrosion, and make sure the area around the heater is clear.
  • On the manufacturer’s schedule: flush sediment from the tank, or have a plumber do it.
  • Every few years, or during service: have a plumber check the anode rod and the temperature and pressure relief valve.
  • For gas units: make sure the vent pipe is intact and properly connected, with no gaps, rust or signs of soot. Have a licensed professional check the burner and venting if anything looks wrong.
  • For tankless units: follow the descaling and filter cleaning schedule in the owner’s manual, especially if you have hard water.
  • Any time: test carbon monoxide alarms near gas appliances and sleeping areas.

Preparing for an Emergency Before It Happens

Even a well-maintained water heater can fail eventually. A little preparation now can limit the damage if it does.

  1. Find the cold water shutoff. Locate the valve on the cold water line above the heater and make sure it turns. In a leak, closing it stops more water from entering the tank.
  2. Know how to shut off power or gas. Label the breaker for an electric unit. For a gas unit, know where the gas shutoff valve is on the supply line.
  3. Find the main water shutoff. If the cold shutoff will not close, the main shutoff for the house will stop the water.
  4. Add a pan and a leak alarm. A drain pan piped to a drain and an inexpensive water sensor near the base can catch a leak early, which matters most when the heater sits in an attic, closet or finished area.
  5. Keep a plumber’s number handy. Saving it in your phone before you need it saves time in an emergency.

Mistakes to Avoid

  • Opening the drain valve with the water still hot. As noted above, tank water can scald. Let it cool first.
  • Ignoring a dripping relief valve. It can signal excess pressure or temperature, or a failing valve. Have it checked rather than capping or plugging it.
  • Storing items near a gas heater. Laundry piles, cleaning chemicals and paint cans are fire hazards near a burner.
  • Turning the temperature way up for the holidays. It raises scald risk. Spreading out showers, laundry and dishwasher loads is a safer way to stretch hot water.
  • Waiting for the tank to fail. A unit showing several warning signs is worth replacing on your schedule rather than in an emergency.

Questions Homeowners Ask

How do I find out how old my water heater is?

The manufacture date is often printed on the label or encoded in the serial number. The manufacturer’s website or customer service line can usually decode it.

Is it normal for my water heater to make noise?

Some light ticking as pipes expand is common. Loud popping or rumbling often means sediment buildup, which flushing may help.

Why does my hot water smell like rotten eggs?

This can happen when bacteria in the water react with the anode rod. A plumber can suggest solutions, such as a different anode material or treating the tank.

Latest stories

View all
--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse