A.X. Home Pro is loading
Handle and lock on a white garage door

Garage Door Maintenance

Posted by:

|

On:

|

For many households, the garage door is the real front door. It opens and closes several times a day, carries a lot of weight, and usually gets attention only when it starts grinding, jerking or refusing to move. A little routine care keeps it quiet, smooth and safe. The essentials are straightforward: lubricate rollers and hinges, and test balance and the auto-reverse sensors. Fall is a good time to do it, before cold weather stiffens lubricants and makes worn parts more likely to fail.

How a Garage Door System Works

Understanding the parts makes maintenance easier and helps you know where the risks are.

  • Door panels or sections connected by hinges so the door can curve up into the tracks.
  • Rollers on each side that ride in vertical and horizontal tracks.
  • Springs, either torsion springs mounted above the door or extension springs along the horizontal tracks, which counterbalance the weight of the door.
  • Cables and drums that work with the springs to lift the door.
  • The opener, which moves the door but is not meant to lift its full weight.
  • Safety sensors, photo eyes near the floor that stop and reverse the door if something crosses its path.

The springs do the heavy lifting. A well-balanced door feels light because the springs carry most of its weight. That is also why springs and cables are under high tension and can cause serious injury if handled incorrectly.

Advertisement

Step 1: Look and Listen

Start by running the door through a few full cycles and paying attention.

  • Does it move smoothly, or does it jerk, shake or hesitate?
  • Do you hear grinding, squeaking, scraping or popping?
  • Are both sides moving evenly?
  • Does it close fully and seal against the floor?

Then close the door and inspect the hardware. Look for frayed cables, rusty or broken springs, loose bolts, bent tracks, cracked rollers and worn hinges. Check the bottom seal for cracks, tears or gaps.

Step 2: Lubricate Rollers and Hinges

Moving metal parts need lubrication to stay quiet and reduce wear. Use a lubricant made for garage doors, such as a white lithium grease spray or a silicone-based garage door lubricant. Avoid heavy grease that attracts dirt.

  1. Hinges. Apply a small amount to the pivot points of each hinge between panels.
  2. Rollers. Lubricate the bearings inside steel rollers. Nylon rollers with sealed bearings generally need less, but the stem bearings still benefit.
  3. Springs. A light coat on torsion springs can reduce friction and noise. Do not loosen or adjust them.
  4. Bearing plates and lock mechanism. Give these a light spray as well.
  5. Opener rail or chain. Follow the opener manufacturer’s guidance; some systems need lubrication and some do not.

Do not lubricate the inside of the tracks. Rollers should roll in the track, not slide on grease. Instead, wipe the tracks clean with a damp cloth to remove dirt and debris. Wipe away excess lubricant so it does not drip on cars or the floor.

Step 3: Test the Balance

An unbalanced door makes the opener work harder, wears out parts faster and can be dangerous. Testing is easy:

Advertisement
  1. Close the door completely.
  2. Pull the emergency release cord to disconnect the door from the opener.
  3. Lift the door by hand to about halfway up.
  4. Let go carefully and watch.

A balanced door should stay roughly in place or move only slightly. If it falls quickly or shoots upward, the springs need adjustment. Reconnect the opener when you are done by following its instructions.

Important: spring adjustment and replacement are not do-it-yourself jobs for most homeowners. Torsion springs in particular are under extreme tension. Leave spring and cable work to a trained garage door technician.

Step 4: Test the Auto-Reverse Sensors

Garage door openers have safety features designed to keep the door from closing on people, pets and objects. Test them regularly.

Photo-eye test

  • Start closing the door and wave an object, like a broom handle, through the path of the sensors near the floor.
  • The door should stop and reverse.
  • If it does not, check that the sensors are aligned, their lenses are clean and their indicator lights are on. Realign them if they have been bumped.

Contact reversal test

  • Lay a piece of wood, such as a 2×4 laid flat, on the floor in the door’s path.
  • Close the door. When it touches the wood, it should stop and reverse.
  • If it does not, the opener’s force or travel settings may need adjustment according to the manufacturer’s instructions, or the opener may need service.

If either safety test fails, do not use the automatic opener until the problem is fixed. Keep children away from the door and out of reach of the remote.

Step 5: Tighten and Seal

  • Tighten hardware. Vibration loosens bolts and screws on hinges and track brackets. Snug them with a socket wrench, but do not touch the bolts on the bottom brackets, which are attached to the cables under tension.
  • Replace the bottom seal. A worn seal lets in cold air, water, leaves and pests.
  • Check weather stripping along the sides and top of the door.
  • Replace remote and keypad batteries before they die at an inconvenient time.

When to Call a Professional

  • Broken, stretched or gapped springs
  • Frayed or loose cables
  • Bent or misaligned tracks
  • A door that is off its track or hanging crooked
  • An opener that strains, stops or fails safety tests after adjustment
  • Damaged panels that affect how the door moves

What to Do This Week

  • Run the door through several cycles and listen for trouble.
  • Lubricate rollers and hinges, and wipe the tracks clean.
  • Test balance with the opener disconnected.
  • Test the auto-reverse sensors with both the photo-eye and contact tests.
  • Tighten loose hardware, check the bottom seal and replace remote batteries.

AX Home Pro handles repairs, improvements and maintenance for homeowners. Request an estimate to get started.

Latest stories

View all

Posted by

in

--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →Paxton-Digital

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse