A.X. Home Pro is loading
Worker washing a sidewalk with a hose

Pressure Washing Dos and Don’ts

Posted by:

|

On:

|

Use low pressure on siding and decks, never on windows or roofing. Keep the wand moving. Pressure washers are satisfying tools: a few passes and years of grime, mildew and pollen disappear. But that same power can strip paint, gouge wood, force water behind siding, break windows and void a roof’s warranty in minutes. Used correctly, a pressure washer is a great way to refresh your home’s exterior. Used carelessly, it can cause damage that costs far more than the cleaning saved. Here are the dos and don’ts that keep your home, and you, safe.

Understanding Pressure, Tips and Technique

Pressure washers are rated by pressure, usually in PSI, and by water flow. But the number on the machine isn’t the only thing that determines how hard the water hits. Three factors matter:

  • The nozzle tip. Tips are often color-coded by spray angle. Narrow tips concentrate the stream into a small, intense spot. Wider tips spread the water out and are much gentler. A zero-degree tip is extremely aggressive and has very few safe uses around a house.
  • Distance. The closer the nozzle is to the surface, the more force it delivers. Backing away reduces pressure.
  • Angle. Spraying straight on hits harder than spraying at an angle.

Many cleaning jobs don’t need high pressure at all. Applying a cleaner suited to the surface, letting it work, then rinsing at low pressure often gives better results with far less risk.

Advertisement

Do: Use Low Pressure on Siding

Siding is designed to shed rain falling from above, not water blasted from below or straight on. High pressure can drive water behind siding panels, into wall cavities and around windows, where it can lead to rot and mold. It can also crack vinyl, etch or splinter wood, and damage fiber cement surfaces or paint.

  • Use a wide-angle tip and low pressure, or a soft-wash approach with an appropriate cleaner.
  • Spray downward, in the direction water naturally runs off the siding, rather than upward into the laps.
  • Work in sections from bottom to top when applying cleaner, to reduce streaking, then rinse from top to bottom.
  • Keep a safe distance and test in an inconspicuous spot first.
  • Avoid spraying directly into vents, light fixtures, electrical outlets and around utility meters.

Do: Use Low Pressure on Decks

Wood decks are especially vulnerable. Softwoods common in decking can be gouged easily, and high pressure raises the grain, leaving the surface fuzzy and splintery. That rough surface absorbs stain unevenly and can feel worse underfoot.

  • Use a wide-angle tip and the lowest pressure that gets the job done.
  • Work along the length of the boards, with the grain.
  • Keep a consistent distance from the surface.
  • Pre-treat with a deck cleaner to loosen dirt and mildew so you need less pressure.
  • Let the deck dry thoroughly before staining or sealing.

Composite decking has its own care requirements. Check the manufacturer’s guidance, since some don’t recommend pressure washing at all or limit the pressure.

Don’t: Pressure Wash Windows or Roofing

Windows

Never use a pressure washer on windows. The force can crack or shatter glass, break seals on double-pane windows, which causes fogging between the panes, and force water past window frames into walls. Clean windows by hand or with a gentle hose rinse instead, and be careful spraying near them when washing siding.

Roofing

Never pressure wash a roof. On asphalt shingles, high-pressure water strips away the protective granules that shield shingles from the sun, shortening the roof’s life. It can also lift shingles and drive water underneath them. Many shingle manufacturers warn against pressure washing. Beyond the damage, working on a wet roof with a pressure washer is dangerous. Dark streaks on shingles are often caused by algae and are typically treated with a low-pressure application of an appropriate cleaner; this is a job best left to professionals who follow the manufacturer’s recommendations.

Advertisement

Do: Keep the Wand Moving

Holding the spray in one spot, even for a moment, concentrates force and can etch concrete, carve lines into wood, leave stripes on siding or strip paint. Keep the wand in steady, sweeping motion, overlapping passes slightly for an even result. Start spraying away from the surface, then bring it in, and move off the surface before stopping.

Safety Dos and Don’ts

  • Do wear eye protection, closed-toe shoes and long pants. Debris can fly.
  • Don’t point the wand at people or pets, or at your own feet. Pressure washer spray can cause serious injury.
  • Don’t use a pressure washer from a ladder. The recoil can knock you off balance. Use an extension wand from the ground instead.
  • Do keep electrical safety in mind. Keep electric units and cords away from standing water and use GFCI-protected outlets.
  • Don’t run gas-powered units in enclosed spaces, including garages, because of carbon monoxide.
  • Do cover plants and outdoor outlets, and close windows and doors.
  • Do check older homes for lead paint before blasting peeling paint, since dislodged paint chips and dust can be hazardous.

Common mistakes

  • Using the most powerful tip because it seems faster
  • Spraying upward under siding laps
  • Holding the wand too close or too still
  • Cleaning windows, roofs or delicate surfaces
  • Skipping cleaners and relying on pressure alone
  • Staining or painting before surfaces have dried

What to Do This Week

  1. List what you want to clean: siding, deck, driveway, walkways, patio furniture.
  2. Choose the right cleaner and the widest tip that works for each surface.
  3. Test in an out-of-the-way spot before cleaning a whole area.
  4. Skip windows and roofing entirely.
  5. Keep the wand moving, and let surfaces dry fully before any staining or painting.

If pressure washing reveals loose siding, damaged boards, peeling paint or wood rot, we can repair it. AX Home Pro handles repairs, improvements and maintenance for homeowners. Request an estimate to get started.

Latest stories

View all

Posted by

in

--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →Boston Made Pets

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse