A.X. Home Pro is loading
White house with red shutters and a chimney

Shutters and Trim Repair

Posted by:

|

On:

|

Shutters and trim frame your home. They give the exterior its character and finish, and they also protect the edges and openings where water most likes to get in. When shutters hang crooked or trim starts to crack and rot, the whole house looks tired, and the damage tends to spread. The fix usually falls into one of three paths: refasten, repair or replace with composite. Knowing which one fits is the key to a repair that lasts.

Why Shutters and Trim Fail

Exterior trim and shutters face constant exposure to sun, rain, wind and temperature swings. Common causes of trouble include:

  • Water. Moisture gets into cracks, joints and unpainted end grain, leading to swelling and rot.
  • Failed paint and caulk. Once the protective finish breaks down, wood is exposed.
  • Loose fasteners. Nails and screws back out over time as wood expands and contracts.
  • Corroded hardware. Rusting fasteners, hinges and shutter dogs weaken and stain.
  • Wind. Loose shutters can bang against siding, damaging both.
  • Splashback. Trim close to the ground or below overflowing gutters stays wet.
  • Insects. Wet, soft wood attracts carpenter ants and other pests.

How to Inspect Shutters and Trim

Walk around the house and look closely at every window, door and corner. Check:

Advertisement
  • Shutters that hang crooked, wobble or rattle in the wind
  • Missing or loose screws, fasteners or shutter hardware
  • Cracked, split or warped boards
  • Peeling paint and open joints
  • Gaps between trim and siding or trim and windows
  • Soft spots on window sills, brick molding, corner boards and fascia
  • Rot at the bottoms of door frames and trim near the ground
  • Rust stains below fasteners

Press a screwdriver gently into suspect wood. If it sinks in easily, the wood is soft and likely rotting.

Path One: Refasten

Many shutter and trim problems are simply loose pieces. If the material is sound, refastening is the quickest fix.

  • Use corrosion-resistant fasteners. Stainless steel or coated exterior screws resist rust and staining.
  • Hit solid material. Screws should go into the framing or solid backing, not just into siding or loose sheathing.
  • Use shutter fasteners or screws designed for the shutter type. Vinyl and composite shutters often use specific fasteners that allow for expansion.
  • Avoid overtightening. Crushing vinyl or composite shutters can cause cracking or warping.
  • Seal holes. Fill old holes, caulk joints and touch up paint so water does not get in.

Functional, hinged shutters may need hinges, pintles or shutter dogs replaced or realigned so they open, close and hold properly.

Path Two: Repair

When damage is limited, a repair can save the original piece. This is especially worth doing on historic trim or custom millwork that would be hard to match.

Small cracks and gaps

Fill with exterior wood filler or a paintable exterior caulk, depending on the size and location. Prime and paint so the repair is protected.

Advertisement

Small areas of rot

  1. Dig out all soft, rotted wood until you reach solid material.
  2. Let the area dry thoroughly.
  3. Apply a wood consolidant to strengthen the surrounding fibers.
  4. Fill with an epoxy wood filler and shape it to match the profile.
  5. Sand smooth once cured, then prime and paint.

Partial replacement

If one section of a long trim board is rotted, it can often be cut out and replaced with a matching piece, joined with a scarf joint and sealed.

Path Three: Replace With Composite

When a shutter or trim piece is badly rotted, split or warped, replacement is the better choice. For many homes, composite and PVC trim and shutters are worth considering.

  • Rot resistance. Composite and PVC materials do not rot like wood, which makes them a strong choice in wet locations.
  • Insect resistance. They do not attract wood-boring insects.
  • Stability. Many composite products resist warping and splitting.
  • Paintability. Many can be painted to match your home, though some require specific paint colors or products. Check the manufacturer’s guidance.
  • Classic look. They can be milled into traditional profiles, so they blend with existing trim.

Composite and PVC do expand and contract with temperature, so proper installation matters. Follow manufacturer instructions for fastening, gaps and sealing joints.

Where composite makes the most sense

  • Window sills and brick molding
  • Door frames and the bottoms of door casings
  • Corner boards near the ground
  • Fascia and rake boards below gutters
  • Shutters on exposures that see a lot of sun and rain

Finish the job with paint and caulk

Whichever path you take, the work is not complete until it is sealed. Prime all bare wood, including the back and cut ends of new boards before installation. Caulk joints between trim and siding with a paintable exterior caulk, leaving weep paths open where the trim or window manufacturer calls for them. Then paint with a quality exterior finish. A repaired or replaced piece that is left unpainted will start absorbing moisture right away, and you will be back at the same problem sooner than you expect.

Common Mistakes

  • Painting over soft or rotted wood instead of repairing it
  • Using interior fasteners or fillers outdoors
  • Leaving cut ends of new wood trim unprimed
  • Caulking the bottom edge of trim in ways that trap water
  • Replacing rotted trim without fixing the water source, such as an overflowing gutter
  • Fastening vinyl shutters too tightly

What to Do This Week

  • Walk the exterior and inspect every shutter and trim piece.
  • Probe sills, door frames and corner boards for soft wood.
  • Refasten loose shutters and trim with corrosion-resistant fasteners.
  • Repair small areas of rot before winter moisture arrives.
  • Plan to replace badly damaged pieces, and consider composite for wet locations.

Refasten, repair or replace with composite: the right choice keeps your home looking sharp and protected. AX Home Pro handles repairs, improvements and maintenance for homeowners. Request an estimate to get started.

Latest stories

View all

Posted by

in

--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →Beacon Federal Partners

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse