A.X. Home Pro is loading
Warm sunlight streaming through window blinds

Solar Shades and Openness Factor: Balancing View, Glare and Heat

Some windows are too good to cover completely. A view of the yard, the water or the trees is often the reason a room was designed the way it was, yet that same window can flood the room with glare and heat on a summer afternoon. Solar shades are made for this situation. They are roller shades made from a woven screen fabric that cuts sunlight while leaving the view visible, and choosing the right one comes down to two variables: openness and color.

What Openness Factor Means

Openness factor describes how much of the fabric is open weave, expressed as a percentage. A fabric with low openness, such as one or three percent, has a tight weave that blocks more sunlight, glare and ultraviolet light and gives more daytime privacy, but the view becomes softer. Higher openness, such as ten percent, preserves a clearer view and more daylight while letting in more heat and glare. Five percent is a common middle choice. Manufacturers publish the openness of each fabric, often along with data on how much solar energy and visible light it transmits and reflects.

Why Color Matters More Than You Might Expect

The color of the fabric changes both comfort and view, and the two pull in opposite directions.

Advertisement
  • Dark fabrics absorb light and reduce glare, and they provide the clearest view out, because the eye looks through a dark screen more easily. They absorb heat as well, though, and some of that warmth stays near the window.
  • Light fabrics reflect more solar heat back through the glass, so they can do better at heat control. They can glow when sun strikes them, which brightens the room but makes the view harder to see.
  • Dual-sided fabrics pair a light, reflective face toward the window with a darker face toward the room, aiming for the strengths of both.

Privacy and Night

Solar shades provide daytime privacy because the outdoors is brighter than the room. After dark, with lights on inside, the effect reverses and people outside can see in. Bedrooms and street-facing rooms that need nighttime privacy may pair solar shades with drapery, or use a dual-roller system that mounts a solar screen and a room-darkening shade on one set of brackets.

Where Solar Shades Work Best

They shine on west- and east-facing windows, where low-angle sun streams in, and on large glass walls and sliding doors in family rooms and kitchens. They are also popular in home offices, where screen glare is a daily frustration. Because the fabric is a woven screen, it is durable, easy to vacuum or wipe and generally more resistant to fading than many decorative textiles. Like any interior covering, a solar shade works best when lowered before the room heats up, so motorized or scheduled operation can help.

When choosing, ask to see fabric samples at the actual window at the time of day the sun is strongest. A few minutes of testing will tell you more than any chart about how much view you keep and how much glare you lose. If you are fitting shades as part of a larger project, our contact page is a good place to start.

Choosing a Fabric Window by Window

Openness and color work together, and the best combination depends on what each window faces and how the room is used. These pairings are good starting points for conversation, not rules.

  • Family room with a big west view. A dark fabric at a low to moderate openness cuts afternoon glare while keeping the view as clear as possible. If heat is the bigger complaint, consider a dual-sided fabric.
  • Home office. Glare on screens is the main concern. A tighter weave, often with a darker face toward the room, usually works best. Position the desk so the window is to the side rather than behind the monitor.
  • Kitchen over a sink. Moderate openness keeps daylight for cooking and cleaning. A fabric that wipes clean easily is a practical choice near splashing water.
  • Sunroom or room with walls of glass. A low openness and a light-backed or dual-sided fabric help manage the large heat gain from so much glass.
  • North-facing windows. These rarely take direct sun, so a higher openness or no shade at all may be enough.

Testing Samples the Right Way

  1. Request several openness levels in the same color. Comparing one, three, five and ten percent side by side shows how the view changes.
  2. Request the same openness in different colors. This shows how color alone affects glare and visibility.
  3. Tape samples to the glass at the worst time of day. For a west window, that is late afternoon. Stand where you usually sit and look both at the view and at the brightness of the fabric itself.
  4. Check from outside. Look at the samples from the street or yard during the day to see how they appear and how much of the room is visible.
  5. Repeat at night. Turn on the room lights after dark and look again from outside so you know what privacy you will and will not have.

Installation Details Worth Planning

  • Mount type. Inside mounts look clean but leave light gaps at the edges. Outside mounts overlap the frame and reduce gaps, which matters more for glare control than for view.
  • Fascia or cassette. A cover over the roller hides the rolled fabric and gives the top of the window a finished look.
  • Bottom bar and hems. A weighted bottom bar keeps the fabric hanging straight, especially on wide windows.
  • Power for motors. If you are remodeling, ask about wiring for motorized shades while walls are open, or plan for battery or rechargeable motors.

Questions We Hear

Do solar shades block ultraviolet light?

They reduce it, and tighter weaves block more. Manufacturers usually list how much ultraviolet light each fabric blocks, which can help protect floors and furniture from fading.

Advertisement

Can solar shades go on a sliding door?

Yes. Roller solar shades are common on sliders, mounted high enough to clear the door handle. Very wide doors may need two shades side by side.

How do I clean them?

Most woven screen fabrics can be dusted with a soft brush attachment and spot cleaned with mild soap and water. Follow the manufacturer’s care instructions, and avoid harsh cleaners or scrubbing that could fray the weave or leave visible marks on the fabric.

Will a solar shade keep a room fully cool?

It helps, but it is one layer among several. Good windows, attic insulation and exterior shade from trees or awnings all add to its effect.

Latest stories

View all
--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse