A.X. Home Pro is loading
Fine mesh screen backlit by warm light

Window Screen Repair

Posted by:

|

On:

|

A torn window screen is one of those small annoyances that sticks around far longer than it should. Bugs get in, the window looks neglected, and the fix keeps landing at the bottom of the list. The good news is that most screens are easy to bring back. New screen material and spline make a screen like new in minutes, and early fall, when you still want open windows on cool evenings, is a great time to do it.

How a Window Screen Is Built

Most removable window screens use the same simple design. Understanding it makes the repair much less intimidating.

  • The frame. Usually aluminum, sometimes vinyl or wood, with a channel groove running around the inside edge.
  • The screen material. The mesh itself, stretched across the opening.
  • The spline. A flexible rubber or vinyl cord pressed into the channel to lock the mesh in place.

When the mesh tears or the spline dries out and shrinks, you do not need a new screen. You simply replace the mesh and spline and reuse the frame.

Advertisement

Choosing Screen Material

Screen material comes in several types. Pick the one that fits how you use the window.

  • Fiberglass. The most common choice. It is flexible, easy to work with, does not dent and does not rust. A good default for most windows.
  • Aluminum. Stiffer and more durable against snags, but it can crease or dent during installation and may oxidize over time.
  • Pet-resistant screen. A heavier, tougher mesh designed to stand up to claws and paws. Great for doors and low windows.
  • Solar or sun-control screen. A denser weave that cuts heat and glare, useful on windows that get strong afternoon sun.
  • Fine-mesh screen. A tighter weave to keep out very small insects.

Buy a roll a few inches larger than the frame on every side so you have material to grip while you work.

Choosing the Right Spline

Spline comes in different diameters, and using the right size matters. Too thin, and the screen pulls loose. Too thick, and you will struggle to press it into the channel and may bend the frame. The easiest way to get it right is to pull out a piece of the old spline and take it with you to match. If the old spline is badly shrunk or brittle, measure the channel width instead.

Step-by-Step: Rescreening a Window Screen

You will need new screen material, spline, a spline roller, a utility knife with a fresh blade, a flat screwdriver or awl, and a flat work surface.

  1. Remove the screen from the window and lay it flat on a table or clean floor.
  2. Pull out the old spline. Find the end, usually in a corner, and lift it out with a screwdriver or awl. Remove the old mesh.
  3. Clean the frame. Wipe out the channel and straighten any bent corners. A bent frame will not hold an even screen.
  4. Lay out the new mesh. Center it over the frame with a few inches of overlap on every side.
  5. Start the spline. Beginning at a corner, use the convex wheel of the spline roller to press the mesh into the channel, then the concave wheel to press the spline in on top.
  6. Work around the frame. Do one long side, then the opposite side, then the shorter sides, keeping light, even tension so the mesh stays tight but does not bow the frame.
  7. Handle the corners. Push the spline into each corner with a screwdriver to make a clean turn.
  8. Trim the excess. Run a sharp utility knife along the outer edge of the spline, angled away from the screen, to cut off the extra mesh.
  9. Reinstall the screen and check that it sits snugly in the window.

Once you have done one, the next screen goes much faster. That is why we say new material and spline can make a screen like new in minutes.

Advertisement

Small Tears and Other Quick Fixes

Not every problem needs a full rescreen.

  • Tiny holes in fiberglass can be sealed with a dab of clear adhesive.
  • Small tears can be covered with a screen patch kit, which works best on low-visibility windows.
  • Loose mesh often means the spline has shrunk. Replacing just the spline may solve it.
  • Bent frames can sometimes be straightened. Badly damaged frames can be replaced with a new frame kit cut to size.
  • Missing pull tabs or spring clips are inexpensive replacement parts that make screens easier to remove and reinstall.

Common Mistakes

  • Pulling the mesh too tight, which bows the frame inward and leaves gaps at the window
  • Using the wrong size spline
  • Trimming with a dull blade, which tears the mesh
  • Working on an uneven surface, which twists the frame
  • Forgetting to straighten bent corners before installing new mesh

Caring for Screens Through the Seasons

A little care keeps screens in good shape longer. Rinse them gently with a hose and mild soap a couple of times a year, and let them dry before reinstalling. If you remove screens for winter, label each one with its window location and store them flat or upright in a dry place where they will not be bent or punctured. Check them each spring before reinstalling, so tears get fixed before bug season.

Screens on sliding patio doors and screen doors take more wear than window screens. They may need heavier mesh, new rollers or adjustments to slide smoothly.

What to Do This Week

  • Walk around the house and check every screen for tears, loose mesh and bent frames.
  • Pull a piece of old spline to match the size before buying supplies.
  • Choose the screen material that fits each window, including pet-resistant mesh where needed.
  • Rescreen the worst one first to get the hang of it.
  • Label and store any screens you plan to take down for winter.

Have a whole house full of screens, a sliding door that needs work or frames that are past saving? AX Home Pro handles repairs, improvements and maintenance for homeowners. Request an estimate to get started.

Latest stories

View all

Posted by

in

--:--·---·--°

Designed and Built by Fenway Web.

Our Network & Sponsors

Advertisement

Boston Made+Join Boston Made+$20/mo or $199/yr — save $41 when you pay annuallyJoin Now →PupWear (.org)

Advertisement

♫ Music Video Player
Press play — keeps playing while you browse